60mm Thin Foam Earpads, Bag of 200

$68.00
(No reviews yet) Write a Review
In Stock
SKU:
D-60-200
Bulk Pricing:
Buy in bulk and save

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 10 or above and pay only $62.00 each

60mm Foam Thin-Style Earpads, Bag of 200 • Part No: D-60-200

Buy 10 for $62.00 per bag, and save 9%

Measure the earpiece size from edge to edge to determine the correct headphone or headset foam earpad. Your earpiece must fall between the following range:

  • The 60mm earpads will fit an earpiece between 1 34 and 2 18 inches in average diameter
  • Decimal size range would be between 1.75 and 2.13 inches
  • Metric size range would be between 44.5 and 54 millimeters
  • The earpads are round but will conform to oval shaped earpieces; Follow the circumference measurement method described further down the page to determine the diameter

60mm Foam Thin-Style Earpads, Bag of 200 • Part No: D-60-200

  • Each order includes 200 thin-style 60mm size foam earpads - Enough for 100 headphones or headsets
  • We also offer Thick-Style 60mm foam earpads that are 12mm thick
  • Our customers will determine appropriate size earpad for their headphone instead of ordering the earpads based on the make and model of the headphone
  • We recommend that you remove the foam earpad from your headphone and measure the earpiece diameter
  • If the headphone is oval shaped, we suggest that you determine the circumference of the earpiece on your headset (not the foam earpad) and then divide the circumference by 3.14 to get the resulting diameter. You can then make sure that your earpiece is in the size range for the matching earpad sizes. Keep in mind that it is the earpiece on the headset you want to be measuring, and not the old foam earpad.
  • The 60mm size refers to the diameter of the foam earpad from edge-to-edge that will wrap around the headphone earpiece and for the 60mm earpad, the earpiece must be less than 55mm in diameter to fit properly
  • These 60mm thin foam ear pads are black colored and they will fit a headphone earpiece diameter that averages between 1 34 and 2 18 inches in diameter
  • On most headphones, you will find that it is very easy to remove the original foam earpad and replace it by wrapping it around the front edge of the earpiece
  • It is often better to salvage your old headphone and restore it back to like new again just by replacing your old, degraded headphone foam earpads
  • Maintain Effective Hygiene Between Headphone Users
  • Refresh headphones to maintain proper hygiene between many different headphones users, so all those sharing the headsets will be kept clean and safe from head-lice, bacteria, influenza, common cold, hepatitis, and viruses
  • Many facilities replace the earpads on shared headsets to reduce employee absenteeism by preventing the spread of the flu among headphone users
  • Old earpads can harbor head-lice, so it is best to freshen the headphones with new earpads so users are properly protected
  • Maintain good health and hygiene through the use of clean fresh headphone foam earpads and headset cushions

Three methods to measure your earpiece diameter (following removal of the earpad)

  • Circular Earpieces: You can measure the distance going across the earpiece from edge to edge = Diameter
  • Oval Earpieces: [Measurement Across Earpiece + Measurement from top-to-bottom of Earpiece] ÷ 2 = Diameter
  • Measure Circumference: Use a string, dental floss or thin strip of paper to measure the distance around the outer edge of the earpiece to get the circumference. Divide the circumference value by 3.14 = Diameter

Example

  • Lets say your oval earpiece circumference measures 6 1/4 inches long (6.25) so you use this formula: 6.25 ÷ 3.14 = 1.99 inches or roughly 2 inches
  • If the earpiece diameter is 2 inches, you can see that our 60mm foam earpads will fit your headphone, because a 2-inch diameter falls between the range of 1.75 and 2.125 inches in diameter
  • This same method works for metric measurements: If the circumference is 169mm and we divide 169 by 3.14 it equals 53.8mm. A 53.8mm diameter falls between the range of 45.5 and 54mm so our 60mm earpad will fit
  • The 60mm foam earpads will fit an earpiece between 1 3/8 and 1 3/4 in (1.375 in. to 2.125 inches) or 45.5 to 54mm in average diameter
  • The 60mm foam earpads will fit an earpiece with a circumference between 4 5/16 inches and 6 11/16 inches (between 142.8 and 169.6 mm)

It is always best to base your measurement on the size of the headphone earpiece (not the old foam sponge)

  • The earpads will stretch around the outside edges of the earpiece or fit into a thin groove behind the face of the headphone earpiece
  • The earpad size table (shown in the earpad images) will help you to review the appropriate earpads for your headphones
  • NOTE: we also offer thick 60mm foam earpads

Safely Share Headphones Without Sharing Germs, Head-lice or Contagious Viruses

  • Keep users safe and maintain proper hygiene between many different headphones users by refreshing the headphones with new earpads
  • Shared headsets can contain head-lice, bacteria, influenza, common cold, hepatitis, and viruses such as the Common Cold or Covid-19
  • By changing the foam earpads, you can help to reduce absenteeism by limiting users from sharing germs
  • Maintain good health and hygiene through the use of clean fresh headphone foam earpads and headset cushions
  • Refresh headphones to maintain proper hygiene between many different headphones users, so all those sharing the headsets will be kept clean and safe from head-lice, bacteria, influenza, common cold, hepatitis, and viruses
  • Many facilities replace the earpads on shared headsets to reduce employee absenteeism by preventing the spread of the flu among headphone users
  • Old earpads can harbor head-lice, so it is best to freshen the headphones with new earpads so users are properly protected
  • Maintain good health and hygiene through the use of clean fresh headphone foam earpads and headset cushions

Product Composition

The foam headphone cushions are made out of a polyurethane open-cell foam material that is flexible and will stretch around the circular and oval shaped earpieces. The foam material that we use is generally higher in quality (and made to last longer) than the foam earpads that originally came with most headphones and headsets. These hypoallergenic foam earpads are completely latex-free and come packaged in a clear plastic bag. No heavy metals were used in the production of our foam ear pads; therefore they are RoHS compliant.

Quantity
200 Foam Earpads
Earpiece Size Inches
1 3/4 to 2 3/16 inches
Earpiece Size mm
44.5 to 56mm
Earpiece Diameter Decimal
1.75 to 2.125 inches
Material
Foam
Packaging
Plastic bag
Shape
circular or oval
Thickness
5mm

Be the first to review this product

Add A Review

Your email address will not be published. Required fields are marked*