• Contact Us:
  • |
  • |

Microphone Windscreens (11mm Inside Diameter x 19mm Inside Depth), Bag of 2

Microphone Windscreens (11mm Inside Diameter x 19mm Inside Depth), Bag of 2
  • Buy 2 for $5.75 each and save 4%
  • Buy 5 for $5.50 each and save 8%
  • Buy 10 for $4.95 each and save 17%
  • Buy 20 for $4.75 each and save 21%
  • Buy 50 for $4.50 each and save 25%
  • Buy 100 for $3.95 each and save 34%
  • Buy 200 for $3.70 each and save 38%

Availability: In stock

Microphone windscreens (11mm inside diameter x 19mm inside depth), bag of 2 • Part No. HM-1119

  • Foam covers microphones typically found on call center headsets, computer headsets and podium microphones

  • Typically fit onto microphones that are between 3/8-inch (10mm) and 1/2-inch (12mm) in diameter

  • Replace worn, deteriorating and torn mic windscreens

  • Replace missing foam covers from microphones

  • Re-fresh microphones to maintain sanitary conditions between headset users

OR Share:


Microphone windscreens (11mm inside diameter x 19mm inside depth), bag of 2 • Part No. HM-1119

Ideally, you should make a measurement of the diameter of your microphone. Measure across the opening of your old foam windscreen. The HM-1119 fits microphones that are 3/8 inch to 1/2 inch (10mm to 13mm) in diameter. As you will see in the pictures, that is about the diameter of a large Sharpie marker. 

Next, measure the length of the microphone tip; the part that will be inserted into the windscreen. These windscreens are made for a microphone to insert 1 1/16 inch (27mm) into the HM-1119 microphone windscreen. So if the hole depth is about 1 1/16 inches, and the diameter across the opening is about 3/8" to 1/2", then the HM-1119 microphone windscreen will be a good fit for your microphone.

Inside Diameter 0.393" 3/8 inch 10mm
Inside Depth 1.063" 1 1/16 inch 27mm
Overall Height 1.141" 1 3/16 inches 29mm
Overall Diameter 0.900" 7/8 inches 23mm
Color Black    
Quantity 2 per Poly Bag    
SKU No. HM-5525    
Sold in Pairs      
  • Microphone windscreens prevent buffeting wind from producing annoying wind noise
  • Each order of HM-1119 contains 2 foam microphone windscreens
  • Frequently used with thin podium microphones, headset microphones, etc. That are between 3/8" and 1/2" in diameter
  • Windscreen fits microphones on call center headsets that are between 3/8" and 1/2" in diameter
  • The microphone foam windscreens allow voice audio while reducing background noise and wind
  • Give your microphone a makeover with a new microphone cover, with a black windscreen
  • Compare prices and you will see that your are getting 2 windscreens for the price of 1, enabling you to keep a spare in a re-closeable bag
  • Easily remove your old microphone foam sponge cover and install a new Scan Sound windscreen
  • The HM-1119 is a black cellular foam microphone windscreen foam cover, used with many headsets
  • Used to replace worn, torn, missing or deteriorating foam covers on small microphones
  • Some customers purchase these in large quantities to replace the windscreens on shared headsets to prevent the spread of the flu and viruses among call center headset users
  • These windscreens are often used on small podium microphones, computer headsets and call-center headsets

Microphones compatible with the HM-1119 Foam Windscreen:

  • Lapel microphones, overhead microphones, desktop mics, podium microphones and headset microphones with a 3/8 to 1/2-inch diameter microphone
  • Plantronics Headsets, including Supra and DuoPro Models
  • Replacements for Plantronics 24316-01 foam windscreens

For additional details and pictures of all the microphone windscreens view the downloadable files found at the bottom of this web page

Additional Information

Additional Information

Inside Diameter 7/16 in (11 mm)
Inside Depth 1.25 in (32 mm)
Overall Height 1.575 in (40 mm)
Outside Diameter 1.063 in (27 mm)
Color Black
Packaging 2 per bag
Compatibility No
Adding Product to Cart